AbiSee Eye-Pal READER Manuel d'utilisateur télécharger pdf (Page 4)

Assembly

Step 1- Place Eye-Pal VISION on a flat surface with the front

panel facing toward you.

Step 2- Unfold the camera. Pull the camera arm up until it locks

into place with a clicking sound indicating that the arm is in place.

Then swivel/pull the camera head up until you hear a clicking

sound indicating that the camera head is in place.

Step 3- Connect the power supply to the power cord. Turn Eye-

Pal VISION around so front panel is facing away from you. Plug

the power supply into the back of the Base on the left side. Then

plug the other end into a power outlet.

Step 4 – Plug the Keypad into the USB port located on the right

side of the base.

Step 5 – Connect a monitor or TV into the appropriate port on the

back panel.

Your Eye-Pal VISION is now ready for use.

Note – There is a headphone port on the right side panel of the

Eye-Pal VISION for private listening. A headset is NOT included.

1 2 3 4 5 6 7 8 9 ... 19 20

Pas de commentaire

AbiSee Eye-Pal READER Manuel d'utilisateur Page 4